Spirit XT685 User Manual download pdf (Page 19)

Treadmill

XT685

STEP 1: Press and release the Start key to wake display up (if not already on).

Note: Installing the tether key will also wake up the console.

STEP 2: Press and release the Start key to begin belt movement, at .5 mph, then adjust to the desired

speed using the Speed + / - or Fast/Slow keys (console or hand rail). You may also use the quick

speed key, then 0 through 9 to adjust the speed.

STEP 3: To slow the tread-belt press and hold the Speed + / - or Fast/Slow keys (console or hand

rail) to the desired speed. You may also adjust to the desired speed by pressing Quick Speed and then

0 through 9.

STEP 4: To adjust the Incline level, press and hold the Incline + / - or Up / Down keys; you may also

adjust to the desired incline by pressing the Quick Incline key and then 0 through 9.

STEP 5: To stop the tread-belt press and release the Stop key.

Quick Start/ Manual Operation

Pause/Stop/Preset

STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop key

once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The Time,

Distance and Calorie readings will hold while the unit is in the pause mode. After 5 minutes the display

will reset and return to the start up screen.

STEP 2: To resume your exercise, when in Pause mode, press the Start key. The speed and incline will

return to their previous settings.

 Pause is executed when the Stop button is pressed once. If the Stop key is pressed a second time,

the program will end and a workout summary will be displayed. If the Stop button is pressed a third

time, the console will return to the idle mode (start up) screen. If the Stop button is held down for

more than 3 seconds the console will reset.

Incline

 Incline may be adjusted anytime after belt movement.

 Press and hold the Incline + / - or Up/Down keys (console or hand rail) to achieve desired level

of effort. You may also choose a more rapid increase / decrease by selecting the Quick Incline key,

then 0 through 9.

 The display will indicate incline percent in increments of .5 as adjustments are made.

 The incline will return to zero unless the main power switch or safety key are turned off while incline

is at a higher setting.

Dot Matrix Center Display

Eighteen columns of boxes (8 high) indicate each segment of a workout. The boxes only show an

approximate level (speed/incline) of effort. They do not necessarily indicate a specic value - only an

approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline dot matrix

window will build a prole “picture” as values are changed during a workout.

The speed and incline proles will display half of the program at one time (9 columns). They will both

scroll right to left. The Lap track will move in a counterclockwise direction.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

No comments

Spirit XT685 User Manual Page 19